Milling

Corner Radius End Mill 0.25 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.015 in 0.75 in 2 1/2 in

Corner Radius End Mill 0.375 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.015 in 0.875 in 2 1/2 in

Corner Radius End Mill 0.3125 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.015 in 0.5 in 2 in

Corner Radius End Mill 0.3125 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.06 in 0.75 in 2 1/2 in

Corner Chamfer End Mill 2 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.3 mm 24 mm

Corner Chamfer End Mill 6 mm Milling Dia Carbide AlTiN Non-Coolant Through Weldon Flat Metric 45 Degrees 0.1 mm 13 mm

Corner Chamfer End Mill 16 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.3 mm 18 mm

Corner Chamfer End Mill 10 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.2 mm 20 mm

Corner Chamfer End Mill 8 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.2 mm 16 mm

Corner Chamfer End Mill 6 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.1 mm 12 mm

Corner Chamfer End Mill 5 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.1 mm 10 mm

Corner Chamfer End Mill 4 mm Milling Dia Carbide AlTiN Non-Coolant Through Straight Metric 45 Degrees 0.1 mm 8 mm

Solid Router Bit Primary Material Application Composite Diamond Cut Inch 3/8 in Cutter Dia.

Solid Router Bit Primary Material Application Composite Diamond Cut Inch 1/2 in Cutter Dia.

Solid Router Bit Primary Material Application Composite Diamond Cut Inch 1/4 in Cutter Dia.

Ball End Mill 3 mm Milling Dia Carbide Durorey Non-Coolant Through

Ball End Mill 0.125 in Milling Dia Carbide Durorey Non-Coolant Through

Ball End Mill 0.2 mm Milling Dia Carbide Durorey Non-Coolant Through

Ball End Mill 0.25 in Milling Dia Carbide Durorey Non-Coolant Through

Corner Radius End Mill 1 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.03 in 2 in 5 in

Square End Mill 1 in Milling Dia Carbide EXO Non-Coolant Through Straight Length of Cut 3 in Overall Length 6 in Shank Dia 1 in Neck Dia Not Applic...

Corner Radius End Mill 1 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.09 in 3 in 6 in

Corner Radius End Mill 1 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.12 in 1.5 in 4 in

Corner Radius End Mill 1 in Milling Dia Carbide TiAlN Non-Coolant Through Straight Inch 0.25 in 2 in 5 in